HomeShield Tile Bond Anti-Slip
High performance, polymer modified, ready mixed, Slip resistant cementitious adhesive. Ideal to fix any type of tiles & stones over both dry and wet areas like saunas and swimming pools. It is classified as C2 T E according to EN 12004:2012 and Type 3T according to IS 15477:2019
Benefits
Polymer Modified Adhesive
Ensures improved adhesion, enhanced bonding strength and durability
No Vertical Slip
Stays in place after application, allowing for precise bonding on vertical or inclined surfaces
Extended Open Time
Extended open time allows more flexibility of time for positioning and adjusting materials before the adhesive sets. Useful for fixing large format of tiles & stones
Application up to 12mm Thickness:
Thick application of 12 mm for enhanced structural strength and adhesion.
Good Adhesion Strength
Strong adhesion ensures that the bonded materials will remain securely attached over time, even under stress or environmental changes, leading to longer-lasting applications
Product Specs
- Product Data Sheet
COST CALCULATOR
Select the Total Area Where Tile is to be Fixed
Number of bags required
27
Total price
₹14850
APPLICATION PROCESS
Substrate Preparation
The substrate must be stable, cleaned, cured, leveled, dry and free from debonding agents. Old surfaces must be repaired an free from dirt, grease, oil, wax etc.
Mixing
Add 20 Kg bag in approx. 5L of clean water and mix well (Ratio of Tile Adhesive Plus : Water = 2.5:1 by volume)
Application
Spread the mixed adhesive on the substrate to a thickness of approx. 3 -6 mm and comb the adhesive with a suitable notched trowel & then fix the tiles.
Grouting
Keep joints between two tiles using spacers. Allow tiling to set for 48 hours. Apply HS Epoxy Tile Grout to fill the tile Joints.