HomeShield Tile Adhesive Plus
Polymer modified, ready mixed, cementitious adhesive.Ideal to be used in both dry and wet areas like kitchen & bathroom. It is classified as C2 T according to EN 12004:2012 and Type 2T according to IS 15477:2019
Benefits
Non-Sagging, Good Thixotropic Property
The non-sagging thixotropic property ensures that, the adhesive does not sag after application, allowing for precise placement and strong bonds.
Ready To Use
The product just needs water and you can use it conveniently.
Excellent Bond Strength With The Substrate
This leads to longer-lasting bonds and reduces the need for repairs or replacements.
Tile On Tile Application
It avoids the labor costs associated with removing old tiles and preparing the surface, as well as the costs for disposing of the old tiles.
Product Specs
- Product Data Sheet
COST CALCULATOR
Select the Total Area Where Tile is to be Fixed
Number of bags required
27
Total price
₹12150
APPLICATION PROCESS
Substrate Preparation
The substrate must be stable, cleaned, cured, leveled, dry and free from debonding agents. Old surfaces must be repaired an free from dirt, grease, oil, wax etc.
Mixing
Add 20 Kg bag in approx. 5L of clean water and mix well (Ratio of Tile Adhesive Plus : Water = 2.5:1 by volume)
Application
Spread the mixed adhesive on the substrate to a thickness of approx. 3 -6 mm and comb the adhesive with a suitable notched trowel & then fix the tiles.
Grouting
Keep joints between two tiles using spacers. Allow tiling to set for 48 hours. Apply HS Epoxy Tile Grout to fill the tile Joints.